Minimum Relevant Experience (in Years): 10 years
JOB DESCRIPTION:
Having experience in handling treatment plants in semiconductor fab or similar EMS industry is an added advantageEnsure 100% compliance in the operations of STP, ETP and ZLD as per the requirement of CPCB / GPCB.Experience in operation of water and wastewater treatment systems (includes Sewage Treatment Plant, Effluent Treatment Plant with ZLD, Water Treatment Plant, Rainwater Treatment Plant).Should have experience in operating HRSCC, UF and RO Processes.Experience in handling ZLD operations based on MVRE technology.Drive the concept of circular economy within Tata Electronics, with emphasis on Water and Wastewater; This will entail developing common framework, metrics, and guidance around water and Wastewater stewardship.Design, Operate and Maintain water and wastewater systems based on the concept of 4R.Experience in Operation and Maintenance of Water and Wastewater Treatment Systems of more than 500 KLD.Experience in supervising operations of STP / ETP / ZLD with MVRE based and ensure performance parameters of the same are defined and adhered at all times.Prepare and evaluate Water, Wastewater and TDS Balance for assigned site and report deviations from set internal standards and targets on daily basis.To plan and develop water and wastewater utilization, recycle and reuse Policy and ensure deployment at manufacturing sites (company level).Implement a systematic approach to identify, manage, reduce, responsibly control disposal, and minimize waste to landfills from water and wastewater treatment plant operations.Shift planning and scheduling to ensure seamless management of compliance at site 24 X 7Drive the concept of circular economy within Tata Electronics, with emphasis on water and wastewater.Should have experience in operating Rainwater Treatment Plant of capacity > 500 KLD.Drive the concept of water replenishment to meet the Tata Group level target.Collaborate with other teams to reduce environmental risks, manage audits, and report compliance status to leadership.To review and audit compliance in alignment with legal mandates, permits and regulations.Ensure visit and co-ordination with local Pollution control board offices / relevant departments and ensure communication and brand image handling with local authorities.Ensure water and wastewater is managed at the site as per the requirements of CPCB / GPCB requirements.Implement initiatives for water consumption and wastewater generation reduction and drive programs for continual improvement and provide awareness to employees of all level about water and wastewater. Read LessTata Electronics Private Limited (TEPL) is a greenfield venture of the Tata Group with expertise in manufacturing precision components.
Tata Electronics (a wholly owned subsidiary of Tata Sons Pvt. Ltd.) is building India's first AI-enabled state-of-the-art Semiconductor Foundry. This facility will produce chips for applications such as power management IC, display drivers, microcontrollers (MCU) and high-performance computing logic, addressing the growing demand in markets such as automotive, computing and data storage, wireless communications and artificial intelligence.
Tata Electronics is a subsidiary of the Tata group. The Tata Group operates in more than 100 countries across six continents, with the mission 'To improve the quality of life of the communities we serve globally, through long term stakeholder value creation based on leadership with Trust.
Responsibilities:
Define intrinsic and product level reliability requirementsPurchase, install and operationalize all necessary test and monitoring equipmentDevelop and implement standardized lab proceduresSupport R&D and tech transfer teams with reliability analysisBuild and lead a cross functional team across diverse geographiesBuild strong customer relationships based on confidence in TEPL technical capabilities and technology/manufacturing reliabilityPresentation to internal and customer senior executivesTravel, as necessaryEssential Attributes:
Ability to manage, mentor, and lead a team of highly motivated professionals.Able to work independently, self-motivated with a strong drive to win.Team player with the ability to work across diverse cross-functional teams spread across the world.Leadership skills to influence all levels of the organization.You're inclusive, adapting your style to the situation and diverse global norms of our people.An avid learner, you approach challenges with curiosity and resilience, seeking data to help build understanding.You're collaborative, building relationships, humbly offering support and openly welcoming approaches.Innovative and creative, you proactively explore new ideas and adapt quickly to change.Qualifications:
M.S or PhD in Physics, Electrical Engineering, Materials Science or equivalent
Strong understanding of intrinsic device failure modes (HCI, TDDB, NBTI, EM, SM, etc) and accelerated testing methods. Solid understanding of product failure modes and product level accelerated testing (HTOL, HTRB, HTGB, etc)
Understanding of testing methodologies for above; able to procure and maintain these tools
Understanding of accelerated models. Able to model device performance as required
Understanding of aging models
Proven track record in bringing up and managing state-of-the-art lab facilities
Ability to lead cross-functional teams and achieve project completion within timeline and cost targets
Ability to work across different cultures and geographies
Good team player
Innovation and competitive mindset
Desired Experience Level:
15+ years experience in the semiconductor industry
Proven track record of successfully developing new technologies into high volume production
Proven problem solving skills using design of experiments and analytical tools
Read LessMinimum Education Qualification: B.Tech /BE/MTech in Environmental Engineering
Minimum Relevant Experience (in Years): 8 years to 10 years
SHOULD HAVE WILLINGNESS TO WORK IN SHIFTS
JOB DESCRIPTION:
Purpose:
To develop, implement and maintain environmentally responsible business practices.To lead the Implementation of Corporate Environment & Sustainability Protocols across the organization.To ensure strict adherence to environmental standards and nurture a ubiquitous culture of sustainability.To ensure the seamless integration of sustainable practices into the organizational framework.To conceptualize, plan, co-ordinate, develop and deploy Environmental Best Practices across the organization.Key Responsibilities:
The ideal candidate will demonstrate skills and competencies to work and deliver as a Process Expert with Deep Domain Knowledge in areas of Wastewater Treatment
Resource Circulation:
Drive the implementation of Net Zero Water, Water Neutrality, Water Conservation and Water Efficiency initiatives at site.Design, Operate and Maintain Water and Wastewater systems based on the concept of 4R. Evaluate and monitor performance of Zero Liquid Discharge Systems.Derive, set, monitor, analyse and evolve processes and systems for effective operations and act as a Subject Matter Expert in ensuring safe, reliable and compliant operations of all Wastewater Treatment Plants.Prepare and evaluate Water, Wastewater, Flow/TDS Balance for all sites and report deviations from set internal standards and targets on daily basis.To set daily operational parameters (stricter than PCB norms) for treatment plants such as STP/ETP/ZLD and ensure adherence to the set internal parameters.Develop benchmarks, continually strive to set sustainability targets aimed at operational excellence and sustainability.Implement Best Practices in Wastewater treatment, Recycle and Reuse.Ensure state of the art management systems and practices are implemented and sustained at all times.To closely co-ordinate with Facilities and Projects team and ensure seamless co-ordination in maintenance (predictive, preventive and breakdown).Ensure all time availability of all pollution control treatment plants and ensure operational efficacy in treatment.Proactively identify and predict operational and maintenance issues in advance and develop preventive action plans to ensure 100% operational availability of all treatment systems.Prepare daily reports and ensure all gap areas are closed within stipulated time frames.Prepare shift roster and ensure safety and sustainability adherence by all STP operators at all times.Drive the concept of circular economy within Tata Electronics, with emphasis on Water and Waste; This will entail developing common framework, metrics, and guidance around water and Waste stewardship.Identify and promote avenues for rainwater collection and utilization. Implement a systematic approach to identify, control, and reduce wastewater produced through operations. Conduct routine monitoring of overall water performance, including water intake and performance of wastewater treatment systems.To plan and develop Waste Segregation Policy and ensure deployment at manufacturing sites (company level).Implement a systematic approach to identify, manage, reduce, responsibly control disposal, and minimize waste to landfills from operations.To develop and implement Hazardous and Other Waste Management Policies and Procedures and ensure implementation at siteManagement Systems:
To ensure systems, Procedures and documentation at site with a specified focus on Risk Based Thinking.To conduct internal & cross factory audits.To ensure co-ordination with Third Party and internal teams in planning, organizing, execution and successful completion of Certification and Surveillance auditsTo ensure closure of all findings and Horizontal Deployment.To ensure Continual Improvement through Environment Management Programmes.Develop and execute plans for management system implementation at Supplier sitesCorporate Sustainability (GHG, Water, Waste Reporting):
Ensure that targets set by individual stakeholders are in alignment with the Net Zero targets of the organization.Identify, compile, monitor, review, implement and ensure effectiveness of decarbonization measures taken in the organization.Monitor and report GHG, Water, Waste Management and other sustainability related data to all relevant stakeholders.Regularly quantify, set targets, monitor progress, and drive initiatives to reduce consumption of energy, fossil fuel, Water, Waste, Hazardous Substances, and natural resources through conservation, re-use, recycling, substitution, or other measures.Essential Attributes:
A strong team player with a sense of unified commitment, shared responsibility and trust in the team.Problem-solving skills and excellent interpersonal skills.A strong ability to deal with ambiguity and a faced paced work environment.Strong analytical and trouble shooting skills.Certifications:
EMPRI Certified STP Operator and In-charge course certification or equivalentEnvironment ManagementEnvironmental LawCertified Green Factory Practitioner Read LessResponsibilities
About the Role
Drive resolution of existing manufacturing gaps and strengthen production stability by improving system, process, and operational effectiveness. Actively partner with NPI/NTI teams to identify and mitigate manufacturing ramp risks, with strong focus on Safety, Quality, and Process Control in alignment with Automotive IATF requirements, ensuring a robust and reliable transition to high-volume manufacturing (HVM).
1. Manufacturing HVM Enablement & Customer Readiness
Own and drive resolution of existing manufacturing gaps across operations, MES, DM/IDM systems to ensure stable and controlled production execution with minimal disruptionAct as the central integration and escalation lead across Production, Equipment Engineering, and IT/MES to enable structured problem resolution and sustained system robustnessPartner with NPI / NTI teams from early stage to:Identify and mitigate manufacturing ramp risksEnsure readiness aligned to Safety, Quality, and Process Control requirementsDrive compliance with Automotive IATF standards prior to HVMEnsure controlled and risk-free transition to High Volume Manufacturing (HVM) by embedding robust process, system, and operational controlsDrive product and process knowledge capability across manufacturing teams to strengthen execution discipline and reduce ramp-related risks2. Quality & Operational Excellence
Own and lead Quality and Operational Excellence across manufacturing, ensuring full compliance with IATF 16949 and customer requirements, and always maintaining audit-ready operationsOwn and execute independent audit framework, ensuring:Adherence to defined processes and standardsTimely and sustainable closure of identified gapsLead and own reduction of human-induced defects and excursions:Establish structured improvement programs targeting operator-driven variabilityDrive data-driven corrective and preventive actionsOwn customer audit readiness and response, ensuring:Strong demonstration of process control, discipline, and complianceContinuous improvement aligned with customer expectationsOwn and deploy Operational FMEA, ensuring:Systematic identification and mitigation of operational risksFull integration of FMEA outputs into production execution, controls, and MES workflowsOwn ESD Compliance at production floor.Essential Attributes
Qualifications
Bachelor's/master's in engineering (Mechanical, Electronics, Manufacturing or related).
Desired Experience Level
5-10+ years' experience in semiconductor/OSAT/electronics manufacturing.
Read LessAbout Us:
Tata Electronics is a prominent global player in the electronics manufacturing industry, with fast-emerging capabilities in Electronics Manufacturing Services, Semiconductor Assembly and Test, Semiconductor Foundry, and Design Services. Established in 2020 as a greenfield venture of the Tata Group, the company aims to serve global customers through integrated offerings across a trusted electronics and semiconductor value chain.
Job Details:
Job Tile: ManagerExperience: - 10-15 YearsJob Role: Design for Manufacturability (DFM) EngineerJob Location: KolarWhat we are looking for :
Roles & Responsibilities:
Review PCB designs, providing reports and recommendations to improve manufacturability and yieldAct as main technical contact for manufacturability, working with design teams and customers to review and adjust designs, signal integrity/power integrity constraintsAssess manufacturability in NPI and RFQ stages to align proposals with manufacturing capabilitiesCoordinate with engineering, production, quality, and test teams to validate setups and communicate requirementsUpdate DFM guidelines, drive improvement initiatives, and deliver best practices trainingOptimise product designs for manufacturability, assembly, and cost from initial engagement to productionReview PCB data and specs to identify manufacturing issues and provide clear feedback for efficient SMT line setupWork with Business Development, Engineering, and Quality teams during RFQ/NPI phases to refine product designsAlign factory capabilities with customer needs to streamline production processesApply DFM expertise to improve practices, increase first-pass yields, speed up production, and ensure successful SMT launches Read Less